Thank you for your purchase of a Cohesion3D Motion Controller Upgrade!
Circuit Boards are sensitive to electrostatic shock, please ground yourself before handling and observe all proper practices.
All documentation about the Cohesion3D ReMix and Mini boards, including pinout diagrams, mechanical drawings, and pinout diagrams, can be found on our Doumentation site here: https://cohesion3d.freshdesk.com/support/solutions
Pay close attention to proper orientation of modules and connectors. Do not plug a motor driver or power connectors in backwards, either of these things can damage the board and possibly your machine.
Rotary instructions start here: https://forum.cohesion3d.com/t/cohesion3d-rotary-unboxing-setup/1113
IMPORTANT NOTE: IF YOU HAVE A LARGER MACHINE WITH DSP/ EXTERNAL STEPPER DRIVERS, DO NOT PLUG THE ROTARY DIRECTLY INTO THE EXTERNAL DRIVER WITHOUT FIRST CHECKING AND ADJUSTING THE DRIVER CURRENT SETTINGS. YOU CAN FRY THE STEPPER MOTOR ON THE ROTARY. CONTACT US ON THE FORUM SO WE CAN WALK YOU THROUGH THIS PROCESS: https://forum.cohesion3d.com/c/cohesion3d-rotary-attachment
Instructions to upgrade the K40 Laser Cutter: https://forum.cohesion3d.com/t/k40-with-m2nano-cohesion3d-laserboard-installation/88
All other LaserBoard Documentation: https://forum.cohesion3d.com/c/documentation
And additional FAQ & Resources: https://forum.cohesion3d.com/c/faq
Instructions to upgrade the K40 Laser Cutter: https://cohesion3d.freshdesk.com/support/solutions/articles/5000726542-k40-upgrade-with-cohesion3d-mini-instructions-
Instructions to add a Z Table and Rotary: https://cohesion3d.freshdesk.com/support/solutions/articles/5000744633-wiring-a-z-table-and-rotary-step-by-step-instructions
Instructions for alternate GRBL-LPC firmware for Cohesion3D Mini: https://cohesion3d.freshdesk.com/support/solutions/articles/5000740838-grbl-lpc-for-cohesion3d-mini
Instructions for Power Supply Upgrade Kit Installation: https://cohesion3d.freshdesk.com/support/solutions/articles/5000783636-k40-additional-24v-power-supply-upgrade-guide
For Laser Cutting, our recommended software is LightBurn. A free, unlimited, 30 day trial is available.
For more information about Lightburn, and to purchase, please visit: Lightburn Software
Questions? For technical and product support, please post to the Cohesion3D Forum: https://forum.cohesion3d.com