LaserBoard Getting Started

LaserBoard Getting Started

You are here:

LaserBoard Getting Started – Step by Step Guide


Step 1. If you are installing a LaserBoard in a K40, start here: K40 with M2Nano Cohesion3D LaserBoard Installation Guide – Cohesion3D Once completed, go to Step 3.

Step 2. If you are installing a LaserBoard in a laser that is larger than a standard K40, see the differences you may need to deal with: LaserBoard Larger Laser Machine Installation Guide

Step 3. Install Drivers only if neededInstalling Smoothie Drivers (and knowing whether you need to)

Step 4. Setup your machine in LightBurn: Device Setup in LightBurn

Step 5. See our full documentation here for additional setup guides, troubleshooting, and common issues: Cohesion3D Knowledgebase