LightBurn_Camera_2_1024x1024@2x

Official LightBurn Camera

$80.00

Category:

The Official LightBurn Camera will allow you to:

  • Monitor your laser.
  • Position designs on your work material.
  • Trace artwork directly from designs on the bed of the laser.

Unlike most webcams that only work with LightBurn at their lowest resolution, this camera operates at full resolution for the best possible performance.

In stock

Browse Wishlist
Compare

Description

This is a 5 megapixel (2592 x 1944) USB camera, configured by the manufacturer for use with LightBurn, and will work equally well on Windows or Mac systems.  The camera uses a CMOS sensor, with automatic exposure and white balance, and a manually focused lens.

 

Unlike many webcams that only work with LightBurn at their lowest resolution, the LightBurn Camera operates at full resolution for the best possible performance.

 

Each camera comes with a 140 degree lens and a 3 meter (10 foot) USB cable.

 

Note that this camera come exactly as shown, with no enclosure. You will need to produce an enclosure or mount – we are offering these for people who are comfortable doing this themselves, while we come up with one we can include in the future.

 

 

This camera has a 140 degree lens.  In order to determine the minimum height above your table to see the whole laser area, use the wider of the two lengths of your system and divide by 1.8.

 

For example:

  • On a typical 300 x 200 mm K40 laser using the 140 degree lens, divide 300 by 1.8, giving 167 mm above the bed, minimum, to see the whole thing.
  • On a larger 700 x 500 mm laser using the 140 degree lens, divide 700 by 1.8, giving 389 mm above the bed, minimum, to see the whole thing.  For most users, this will mean mounting the camera to the open lid of the laser.

 

Note that there will always be a bit of image loss from undistorting the image, so you should always err slightly toward having a little extra room.

 

Full camera specs:

  • Sensor: OV5648 1/4 Inch CMOS
  • Focus: Manual
  • Object distance: 180mm
  • Interface: USB 2.0
  • Power: USB bus power(5V)
  • Sensitivity: 600mV/(lux • s)
  • Pixel Size: 1.4×1.4um
  • Maximum Image Transfer Rate: 2592*1944@15fps
  • S/N Ratio: 34dB
  • Dynamic Range: 67 dB
  • Lens Construction: 4P+IR
  • F/No: 2.8
  • EFL: 3.34 mm
  • Relative Illumination (Sensor): 70%
  • IR Filter: 650±10nm
  • DSP Type: HJ501
  • AGC/AEC/Whiter balance: Auto
  • Fixed Pattern Noise: < 0.03% of VPEAK-TO-PEAK
  • Module Size: 62x9mm

Additional information

Weight 6 oz
Dimensions 6 × 2 × 1 in
X