External Driver with 3P Terminal

Cohesion3D Rotary DSP External Stepper Driver with 3 Pin Terminal

$30.00

Category:
  • If your laser has larger NEMA 23 steppers, Servo Motors, or 3 Phase, you will have to wire in a separate external stepper driver that uses the same STEP and DIR signals as the Y driver, and then switch between them.
  • This kit contains an external stepper driver and an additional 3 pin terminal block that commonly connects on the DSP controller side.
  • You should also get the wiring connectors above to be most prepared.
Compare

Additional information

Weight 8 oz
Dimensions 1 × 1 × 1 in
X